We repair walk-in freezers in Fort Lauderdale, Florida, for restaurants, supermarkets, warehouses, catering kitchens and food service businesses. A walk-in freezer that loses temperature puts a whole stockroom at risk, so temperature loss is treated as urgent. Call [PHONE] and tell us the unit type, whether the condensing unit is self-contained or remote, and what the box is doing. We will book the earliest visit we can.
Walk-in freezers in Fort Lauderdale fail in patterns the local climate drives. Humid air enters every time the door opens, and a weak defrost system lets the evaporator coil frost solid. Salt air corrodes condenser coils, fan motors and electrical contacts, especially on rooftop and outdoor condensing units. A door heater or gasket failure lets warm moist air in around the door frame. We diagnose the whole system, including the box temperature pulldown after the repair, before we leave.
What We Fix
Defrost systems. Defrost heater, defrost timer, defrost thermostat and control board faults, and full defrost system rebuilds where the coil has frosted solid.
Compressors and condensing units. Compressor faults, condensing unit repair and replacement advice, self-contained and remote condensing units.
Evaporator coils and fans. Evaporator coil repair and replacement, evaporator fan motor replacement, and airflow problems inside the box.
Refrigerant leaks. Refrigerant leak detection, repair and recharge, with the system checked for further leaks.
Door heaters and gaskets. Door heater faults, worn or torn door gaskets, door closer and hinge problems, and ice buildup around the door frame.
Electrical and controls. Thermostats, contactors, control boards, defrost timers and wiring faults.
Panels and insulation. Panel and door seal problems that let warm air into the box and overload the cooling system.
Common Walk-In Freezer Problems
Walk-in freezer losing temperature. Often a defrost system fault, low refrigerant, a failing compressor, or a door heater or gasket failure. We check the defrost cycle, the refrigerant charge, the door seal and the condensing unit first.
Coil frosting solid. A defrost heater, timer or thermostat fault, or a door that does not seal. In Fort Lauderdale humidity a marginal defrost heater can frost a coil solid in a single bad cycle.
Compressor running constantly. A dirty or corroded condenser coil, a failing fan motor, low refrigerant, or a thermostat fault.
Ice buildup around the door. A failed door heater, a worn gasket, or a door closer that does not pull the door shut.
Warm spots in the box. Stock packed against the evaporator, a failed evaporator fan, or poor airflow.
Water on the floor inside or outside the box. A blocked defrost drain, a cracked drain pan, or a door seal leak.
Unit will not start. A failed start relay, control board fault, contactor fault, or power supply problem.
How It Works
Step 1: Book a visit. Call [PHONE] with the unit type, the condensing unit setup, and the symptoms, and tell us if stock is at risk. Temperature loss is treated as urgent.
Step 2: Diagnosis on site. We check box temperature, airflow, the defrost system, the compressor and condenser, the door heater and gasket, and the controls.
Step 3: Clear options before work starts. We explain what is wrong, what the repair involves, and whether repair or replacement makes more sense, with the real figures for your unit.
Step 4: Repair and temperature check. We fit the part, run the freezer, and confirm the box temperature pulls down and holds before we leave.
Commercial Brands We Service
Hoshizaki, Manitowoc, True, Traulsen, Turbo Air, Scotsman, Beverage-Air, Continental and Delfield. If your brand is not listed, call [PHONE] and ask.
Who We Serve
Restaurants, supermarkets, grocery stores, warehouses, catering kitchens, hotels, food service businesses and marinas across Fort Lauderdale and Broward County. We also work on walk-in freezers in cold storage and distribution rooms.
Frequently Asked Questions
Temperature loss in a walk-in freezer is urgent because a whole stockroom is at risk, so tell us when you call. We book the earliest visit we can and confirm the arrival window with you. Call [PHONE] to check today's availability.
Humid air enters through the door and freezes on the evaporator coil. If the defrost heater, defrost timer or defrost thermostat is weak, or the door gasket or door heater has failed, the coil frosts solid and airflow stops. We check the whole defrost system and the door seal, not just the frost.
The cost depends on the fault, the part and the type of unit, so we do not publish a flat price. A gasket or fan motor repair costs far less than a refrigerant leak repair or a condensing unit replacement, so the technician diagnoses the unit first and explains the repair and the cost before any work starts. [OWNER: add diagnostic fee and whether it is credited against an approved repair here]
It depends on the age of the unit, the cost of the repair, and whether the fault is a single part or a failing condensing unit. A younger unit with one failed part is usually worth repairing. An older unit with a failed condensing unit may cost more to repair than the unit is worth. We explain the choice with the real figures for your unit.
Our core work is repair, including defrost systems, compressors, coils, door heaters and gaskets, and refrigerant work. If your walk-in needs a new unit or a panel replacement, call [PHONE] and ask what we can cover for your site. [OWNER: confirm whether installation and panel replacement are offered before publishing this answer]
Where We Work
Fort Lauderdale, including downtown, Las Olas, the beachfront and the Marina District, Victoria Park, Coral Ridge, Wilton Manors, Oakland Park, Harbor Beach and Lauderdale-by-the-Sea, and across Broward County, including Hollywood, Pompano Beach, Plantation, Davie, Sunrise, Lauderhill, Tamarac, Coral Springs, Weston, Miramar, Pembroke Pines, Cooper City, Dania Beach, Hallandale Beach and Lighthouse Point.